#Macclean water softener instructions full#

These are usually supplied as hanging tags, which should be carefully positioned away from any moving arms. If you want to have that fresh smell all the time, use a dishwasher freshener. These cleaners will often leave a fresh smell in the dishwasher too. Special dishwasher cleaners are available which are used when the machine is empty. WHAT ELSE CAN I DO TO GET THE MOST FROM MY DISHWASHER?Ĭleaning your machine about once a month will remove any grease and lime scale deposits which can build up on the inside of the machine. A freshener is essential if you load during the day and then run the machine at night. Special dishwasher cleaning detergents are available which are used when the machine is empty. Hi friend,HOW TO GET THE BEST FROM YOUR DISHWASHERĪlways follow the manufacturer's instructions and read the directions carefully on detergent, rinse aid and salt packaging.Ĭleaning your machine about once a month will remove any grease and lime scale deposits which can build up on the inside of the machine. please do rate the solution positively.thank you for using fixya then run run a prewash cycle and then check out does the salt error is coming up.if yes then more salt needs to be added.

#Macclean water softener instructions full#

Open the salt container at the bottom, and it will be full up with water, and it really will smell bad. Manually drain the floor of the machine, put in salt, and check out. You can purchase one of our Aqua test strips (part number 180876) to determine the hardness of your water from our parts and accessories store or call us on 08448 225 225. You will especially need to use dishwasher specific salt if you live in a hard water area. Salt is needed to ensure that your dishwasher's in-built water softener gives an optimum performance. Why Do I Need to Use Salt in my Dishwasher? The salt isn't used to soften the water, it's used to clean the crystals in the water softener unit. You can set the softener to be at minimum setting if you are in a soft water area. If you stopped using it and then started again you may find that the impurities caught by the crystals have simply found their way into the appliance. This will cause a restriction in the softener unit. If you don't put salt in the appliance then the regeneration crystals will clump together over time and solidify.